NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 484497-1 | 49956 | A | 5 | 9 | 1 | AX | ||
| 484497-1 | 3B150 | A | 3 | 2 | 1 | AX |
CAGE Information
| Code | Company |
|---|---|
| 3B150 | RAYTHEON TECHNICAL SERVICES COMPANY |
| 49956 | RAYTHEON COMPANY DBA RAYTHEON |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.125 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.150 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| ACMD | SECOND END WIDTH ACROSS FLATS | 1.750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 416 |
| AAHP | SECOND END STYLE | HEXAGONAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND T FED SPEC SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 5 |
| AMFZ | SECOND END DIAMETER | 1.5000 INCHES NOMINAL |
| CTBM | SECOND END STEP LENGTH | 0.380 INCHES NOMINAL |