NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| SMB500073 |
80063 |
A |
3 |
2 |
4 |
9Z |
|
|
CAGE Information
| Code |
Company |
| 80063 |
US ARMY COMMUNICATIONS & ELECTRONICS |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| MATT |
MATERIAL |
STEEL COMP 303 |
| AAHP |
SECOND END STYLE |
PLAIN |
| AMFZ |
SECOND END DIAMETER |
0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT |
SPECIAL FEATURES |
MAJOR DIA FLATTED ON TWO SIDES TO A WIDTH OF 0.187 IN. |
| CSPY |
LARGEST STEP DIAMETER |
0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AMDL |
FIRST END DIAMETER |
0.1862 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| ATPC |
STEP QUANTITY |
3 |
| ABHP |
OVERALL LENGTH |
2.100 INCHES MINIMUM AND 2.140 INCHES MAXIMUM |
Similar Parts