NIIN Output Data
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 51C24877 | 98750 | R | 5 | 9 | 3 | SB | ||
| 51C24877 | 97151 | A | 5 | 2 | 3 | SB | ||
| 64C56064-1 | 98750 | R | 5 | 9 | E | AX | ||
| 64C56064 | 98750 | R | D | 9 | A | AX | ||
| 64C56064-1 | 80049 | A | 3 | 2 | 3 | SB | ||
| 51C24877 | 80049 | A | 5 | 2 | 3 | SB |
CAGE Information
| Code | Company |
|---|---|
| 80049 | DEPARTMENT OF THE AIR FORCE |
| 98750 | SAN ANTONIO AIR LOGISTICS CENTER |
| 97151 | AIR FORCE LOGISTICS COMMAND 88 0SS O |
Federal Supply Class
Title
AIRCRAFT GROUND SERVICING EQUIPM
Inclusions:
INCLUDES ENERGIZERS; ENGINE PREHEATERS; MOORING ASSEMBLIES; WHEEL CHOCKS; BEACHING EQUIPMENT; AILERON, ELEVATOR, AND RUDDER LOCKS; PASSENGER LOADING RAMPS; MAINTENANCE PLATFORMS; AIRCRAFT MAINTENANCE AND BOARDING LADDERS; AIRCRAFT MAINTENANCE SLINGS AND HOISTS; AIRCRAFT FIN TILTING JACKS; AIRFIELD SPECIALIZED LIFT TRUCKS AND TRAILERS; FITTED COVERS FOR AIRFRAME COMPONENTS; AIRCRAFT ENGINE COVERS.
Exclusions:
EXCLUDES AIRFIELD SPECIALIZED TRUCKS AND TRAILERS DESIGNED PRIMARILY FOR TRANSPORTING AIRCRAFT ASSEMBLIES (FSC 1740); MAINTENANCE STANDS DESIGNED FOR SUPPORT OF AIRCRAFT ASSEMBLIES DURING REPAIR OR OVERHAUL (FSC 4920); TEST STANDS (FSC 4920); GENERAL PURPOSE JACKS (FSC 5120); SLINGS (FSC 3940), AND HOISTS (FSC 3950); TRAILERS (FSC 2330), LIQUID OXYGEN, AIRCRAFT SERVICING (FSC 1660).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | B-5 AIRCRAFT MAINTENANCE PLATFORM |
| AGAV | END ITEM IDENTIFICATION | B-5 AIRCRAFT MAINTENANCE PLATFORM |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | ONE STEEL TUBE,QQ-T-830,1020,COND W; AND TWO STEEL LUGS,QQ-S-698,1010-1020; TUBE 2.375 IN. OD BY 0.250 IN. WALL THK; 4.00 IN. TUBE LG; LUGS ARE 2.620 IN. LG BY 1.760 IN. W BY 0.224 IN. THK; LUGS WELDED TO EACH SIDE OF TUBE IN LINE AND RUNNING PERPENDICULAR TO RUN OF TUBE; TWO 0.375 IN. DIA HOLES THRU LUGS AND IN LINE; LUGS TAPER DOWN STARTING 1.000 IN. FROM WELDED END OF LUGS TO 0.560 RADIUS AT OUTER ENDS; ONE 3/8-16 UNC 2B THDED HOLE THRU 1 LUG AND ONE SIDE OF TUBE; HOLE CENTERED ON TUBE,AND LOCATED 0.880 IN. FROM HOLE CENTER TO TUBE END |