NIIN Output Data
Definition:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 8100097ADGL | 03511 | A | 3 | 2 | 1 | CX | ||
| 709300PC4 | 10001 | A | 5 | 2 | 1 | CX |
CAGE Information
| Code | Company |
|---|---|
| 03511 | GENERAL ELECTRIC CO SPECIALTY MOTOR |
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
ELECTRICAL CONTACT BRUSHES AND E
Inclusions:
INCLUDES BRUSHES FOR ELECTRICAL ROTATING EQUIPMENT; CARBON STOCK FOR BRUSHES; BRUSH ARM AND HOLDERS; LIGHTING ELECTRODES.
Exclusions:
EXCLUDES ANODES; CATHODES; WELDING ELECTRODES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CARBON GRADE G MFR REF SINGLE MATERIAL RESPONSE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CARBON GRADE G MFR REF SINGLE MATERIAL RESPONSE |
| CRMK | ANGLE | ANY ACCEPTABLE |
| CRBG | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED |
| ABGL | WIDTH | 0.500 INCHES NOMINAL |
| AGEK | SPRING FREE LENGTH | ANY ACCEPTABLE |
| CQGT | CONTACT FACE STYLE | CONCAVE |
| AAQL | BODY STYLE | RECTANGULAR |
| AHXP | BRUSH SHUNT LENGTH | 3.500 INCHES MINIMUM SINGLE SHUNT AND 4.125 INCHES MAXIMUM SINGLE SHUNT |
| STYL | STYLE DESIGNATOR | ONE PIECE |
| CRWQ | PRESSURE SPRING TYPE AND QUANTITY | 1 CYLINDRICAL |
| AABU | SHUNT POSITION DESIGNATOR | 5 |
| AGWM | LARGEST OUTSIDE DIAMETER | ANY ACCEPTABLE |
| MATT | MATERIAL | ELECTROGRAPHITIC |
| ABGG | RADIUS | 1.238 INCHES MINIMUM AND 1.306 INCHES MAXIMUM |
| ABRY | LENGTH | 1.060 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 TWO-PIECE NESTING EYELET CAP |
| ABNM | THICKNESS | 0.500 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | ANY ACCEPTABLE |