NIIN Output Data
NIIN:
NSN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
CAGE Information
| Code |
Company |
| 70210 |
HONEYWELL INTERNATIONAL INC. DBA HON |
| 72599 |
ALLIEDSIGNAL INC DBA ALLIED-SIGNAL A |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ADAV |
OVERALL DIAMETER |
0.776 INCHES MINIMUM AND 0.786 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
0.776 INCHES MINIMUM AND 0.786 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-355 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| ZZZK |
SPECIFICATION/STANDARD DATA |
70210-S8157 MANUFACTURERS STANDARD |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| ABNM |
THICKNESS |
0.040 INCHES NOMINAL |
| AAUB |
HOLE DIAMETER |
0.376 INCHES MINIMUM AND 0.382 INCHES MAXIMUM |
Similar Parts