NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4M0358 | 11083 | A | 3 | 2 | 3 | AX | ||
| 4M358 | 11083 | A | 5 | 9 | 5 | AX | ||
| IPD4M0358 | 55883 | A | 5 | 2 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 11083 | CATERPILLAR INC. DBA CATERPILLAR DIV |
| 55883 | INDUSTRIAL PARTS DEPOT INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AMGE | SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.7450 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.875 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1562 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 36.875 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGA | SECOND END SPLINE LENGTH | 0.875 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 8 |
| AMDL | FIRST END DIAMETER | 0.7450 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.5312 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.562 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.7400 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY |
| AMGF | SECOND END PITCH DIAMETER | 0.6250 INCHES NOMINAL |