NIIN Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4G53456-103A | 98897 | A | 3 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABKV | OUTSIDE DIAMETER | 0.640 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.640 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 302 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESS |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| ABMD | RECESS DIAMETER | 0.572 INCHES NOMINAL |