NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 216126PC3 | 10001 | A | 3 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 46B6 ASSN STD SINGLE MATERIAL RESPONSE |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.4000 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 7.900 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SLOTTED |
| AKTM | FIRST END SLOT WIDTH | 0.0620 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.810 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY |
| AMDW | FIRST END SLOT DEPTH | 0.0800 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.5300 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 5 IN CARRIAGE |
| ATPC | STEP QUANTITY | 5 |