NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4P30032-701B | 98897 | A | 3 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 T1 OR T2 FED SPEC 2ND MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 4TH MATERIAL RESPONSE OVERALL AND MIL-S-7952 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 5TH MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 3RD MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 6TH MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 7TH MATERIAL RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 T1 OR T2 FED SPEC 2ND MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 4TH MATERIAL RESPONSE OVERALL AND MIL-S-7952 MIL SPEC 1ST MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 5TH MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 3RD MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 6TH MATERIAL RESPONSE OVERALL AND QQ-S-698 T1 OR T2 FED SPEC 7TH MATERIAL RESPONSE OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ASDB | WIDTH ACROSS FLATS | 1.360 INCHES NOMINAL |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| HEAT | HEAT TREATMENT | COLD ROLLED |
| ADAV | OVERALL DIAMETER | 1.807 INCHES MINIMUM AND 1.832 INCHES MAXIMUM |
| ABNM | THICKNESS | 0.090 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 1.078 INCHES NOMINAL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND W/FLATS |
| MATT | MATERIAL | STEEL COMP 1015 OVERALL OR STEEL COMP 1008 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1010 OVERALL OR STEEL OVERALL OR STEEL COMP 1020 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |