NIIN Output Data
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| BL97503 | 64959 | R | 5 | 9 | X | XX | ||
| BL97503 | 70408 | F | 5 | 9 | X | XX | ||
| 7598665 | 18876 | A | 3 | 2 | 1 | CX | ||
| 7598665 | 19200 | A | 5 | 2 | 5 | 9Z |
CAGE Information
| Code | Company |
|---|---|
| 18876 | U S ARMY AVIATION AND MISSILE COMMAN |
| 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
| 70408 | AT AND T CORP |
| 19200 | U S ARMY ARMAMENT RESEARCH & DEVELOP |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| MATT | MATERIAL | PLASTIC BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.375 INCHES |
| ABGN | BOARD OVERALL LENGTH | 4.250 INCHES |
| AAMA | MOUNTING HOLE DIAMETER | 0.136 INCHES |
| CSCS | NONFEEDTHRU TERMINAL QUANTITY | 11 SINGLE |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.250 INCHES |
| AAQL | BODY STYLE | STRIP TYPE |
| ABGT | BOARD THICKNESS | 0.094 INCHES |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.625 INCHES |
| CWLG | TERMINAL PATTERN ARRANGEMENT | RANDOM |
| ABGP | BOARD OVERALL WIDTH | 2.500 INCHES |
| MARK | SPECIAL MARKINGS | R14 THROUGH R19,R22A AND R22B |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.438 INCHES |