NIIN Output Data
NIIN:
NSN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 123H10294 | 26512 | A | D | 9 | 1 | AX | ||
| P240102E0332-180 | 78570 | A | C | 1 | 5 | ZZ | AC | |
| CR736CC35-4-0332-180 | 50599 | A | 5 | 1 | 2 | ZZ | ||
| 180AE52-4C-0332 | 50599 | A | 5 | 9 | E | AX | ||
| 123H50294 | 26512 | A | D | 9 | A | AX | ||
| AS631E332L180 | 81343 | A | 3 | 2 | E | ZZ | ||
| 123H10294-17 | 26512 | A | 5 | 9 | 3 | AX | ||
| 123H50294-17 | 26512 | A | 3 | 1 | E | AX | ||
| P660102B0332-180 | 78570 | A | 5 | 1 | E | ZZ | ||
| AE4696E0332-180 | 00624 | A | C | 1 | 5 | ZZ | AC | |
| GH12AR5E332C36 | 26512 | A | 3 | 1 | E | AX |
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
| 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
| 78570 | SMITHS TUBULAR SYSTEMS-LACONIA INC. |
| 50599 | PARKER-HANNIFIN CORPORATION DBA STRA |
| 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRXX | MEASURING METHOD AND LENGTH | 33.250 INCHES NOMINAL WORKING |
| CRXX | MEASURING METHOD AND LENGTH | 33.250 INCHES NOMINAL WORKING |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AARX | INSIDE DIAMETER | 0.212 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 0.390 INCHES NOMINAL |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-38360 SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQQN | EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL CHAFE GUARD, SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND OIL RESISTANT AND HEAT RESISTANT AND SOLVENT RESISTANT |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| AAJD | THREAD CLASS | 3B 2ND END |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATED |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.500 INCHES |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81343-AS631 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |