NIIN Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 215-44505-1 | 80378 | A | 3 | 2 | 1 | KE |
CAGE Information
| Code | Company |
|---|---|
| 80378 | TRIUMPH AEROSTRUCTURES, LLC DBA TRIU |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL |
| CSML | BOTTOM RECESS DIAMETER | 0.830 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | ONE FLAT ON OD 0.800 IN. FROM CENTER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CVA5-2,FSCM 80378 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.190 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.840 INCHES NOMINAL |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM |
| CQJW | TOP RECESS DIAMETER | 0.830 INCHES NOMINAL |
| CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAUB | HOLE DIAMETER | 0.770 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |