NIIN Output Data
NIIN:
NSN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
CAGE Information
| Code |
Company |
| 1VPW8 |
GENERAL DYNAMICS C4 SYSTEMS INC. |
| 81348 |
FEDERAL SPECIFICATIONS PROMULGATED B |
| 94990 |
MOTOROLA INC. DBA INTEGRATED INFORMA |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
A TYPE AND 1 GRADE |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
A TYPE AND 1 GRADE |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-636 COND 1 OR 2,CANC FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABNM |
THICKNESS |
0.025 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
| AAUB |
HOLE DIAMETER |
0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAV |
OVERALL DIAMETER |
0.312 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
Similar Parts