NIIN Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| R400-68A | 56705 | R | 5 | 9 | 5 | KZ | ||
| R400-68A | 45934 | A | 3 | 2 | 5 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 45934 | ONTIC ENGINEERING AND MANUFACTURING, |
| 56705 | DONALLCO INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-611 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| BZRR | THREAD SERIES | UNF |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ASDB | WIDTH ACROSS FLATS | 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| CRSQ | COUNTERSINK ANGLE | 109.0 DEGREES MINIMUM NUT AND 111.0 DEGREES MAXIMUM NUT |
| AGGP | DRILLED HOLE DIAMETER | 0.0465 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| FEAT | SPECIAL FEATURES | 0.046 IN. TO 0.051 IN. W SLOT ON HEX SURFACE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | HEXAGON |
| MATT | MATERIAL | COPPER ALLOY 360 OVERALL |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| ADEA | NUT HEIGHT | 0.177 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |