NIIN Output Data
NIIN:
NSN:
Item Name:
GENERATOR , ENGINE ACCESSORY
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| DE56516 | 6N299 | A | 5 | 2 | 5 | AX | ||
| DE56516R | 6N299 | A | 3 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 6N299 | AGCO CORP PARTS OPN |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 2500 |
| AWDP | THREAD DIAMETER | 0.669 INCHES NOMINAL |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 880 |
| ABPT | SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 6.438 INCHES NOMINAL |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BZRR | THREAD SERIES | UNS |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 125.0 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AFYS | KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.328 INCHES NOMINAL |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 2.938 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | EXTERNALBLASTCOOLING |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.188 INCHES NOMINAL |
| CMLN | MOUNTING HOLE THREAD CLASS | 1B |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 5.0 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 0.844 INCHES NOMINAL |
| CFHL | THREAD CLASS | 1A |
| AASA | THREAD LENGTH | 0.438 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ABRR | KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| BCGN | GROUNDING METHOD | INTERNAL |
| ABFF | FURNISHED ITEMS | DRIVE PULLEY AND VOLTAGE REGULATOR |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.016 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2150 |
| ABVA | UNTHREADED PORTION LENGTH | 0.812 INCHES NOMINAL |