NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2584502 | 80064 | A | 3 | 2 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMHP | SECOND END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFD | FIRST END DISTANCE BETWEEN SECOND AND THIRD GROOVE CENTERS | 0.257 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.9740 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM |
| AMFC | FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.247 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.9062 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.085 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 6.375 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1018 OR STEEL COMP 1117 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AMDL | FIRST END DIAMETER | 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 1.400 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.594 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 15 |
| AAHP | SECOND END STYLE | TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| AMHT | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.762 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.5938 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.9630 INCHES MINIMUM AND 0.9730 INCHES MAXIMUM |
| AAHW | SECOND END GROOVE WIDTH | 0.1750 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.1230 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | THREE CIRCULAR GROOVES |
| AAHG | FIRST END GROOVE WIDTH | 0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| BDSR | SECOND END SPLINE QUANTITY | 10 |