NIIN Output Data
NIIN:
NSN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| SCD19453-2 |
80063 |
A |
5 |
2 |
X |
XX |
|
|
| 40532A |
88431 |
H |
3 |
9 |
X |
XX |
|
|
CAGE Information
| Code |
Company |
| 80063 |
US ARMY COMMUNICATIONS & ELECTRONICS |
| 88431 |
GENERAL TRANSFORMER CO |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABGP |
BOARD OVERALL WIDTH |
1.500 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
1.500 INCHES |
| ABCX |
BOARD CONSTRUCTION |
SOLID CONSTRUCTION |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
4 UNTHREADED HOLE |
| ABCS |
TERMINAL ROW QUANTITY |
1 |
| MATT |
MATERIAL |
PLASTIC PHENOLIC BOARD AND PAPER BOARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-V-173 MIL SPEC SINGLE TREATMENT RESPONSE BOARD |
| AAQL |
BODY STYLE |
BLOCK TYPE |
| SFTT |
SURFACE TREATMENT |
VARNISH BOARD |
| ABGQ |
BOARD OVERALL HEIGHT |
0.250 INCHES |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
RANDOM |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.375 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
9.250 INCHES |
| AAMA |
MOUNTING HOLE DIAMETER |
0.177 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.250 INCHES |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
1.000 INCHES |
| ABDB |
TERMINAL FACILITY QUANTITY |
8 |
| ABDV |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH |
1.000 INCHES |
| MARK |
SPECIAL MARKINGS |
AC INPUT 5 6 7 8 9 10 |
| ABGN |
BOARD OVERALL LENGTH |
10.000 INCHES |
Similar Parts