NIIN Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7232217-01 | 98752 | A | 3 | 2 | 2 | SB |
CAGE Information
| Code | Company |
|---|---|
| 98752 | WARNER ROBINS AIR LOGISTICS CENTER |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPX | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABMH | RECESS DEPTH | 0.210 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 440C OVERALL |
| ABMD | RECESS DIAMETER | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290 CLASS 1,GRADE C FED SPEC 2ND TREATMENT RESPONSE OVERALL OR QQ-P-35,TYPE 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-G-45204,TYPE 1 GRADE C,CLASS 3 MIL SPEC 3RD TREATMENT RESPONSE OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.224 INCHES MINIMUM AND 0.244 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD ALL MATERIAL RESPONSES OVERALL OR QQ-S-763,COND A FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL OR PASSIVATE OVERALL OR GOLD OVERALL |
| AAUB | HOLE DIAMETER | 0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESS |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CQFM | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM |