NIIN Output Data
NIIN:
NSN:
Item Name:
WASHER , FLAT
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
EA2475 |
1DF03 |
A |
3 |
2 |
5 |
KZ |
|
|
607708 |
24617 |
A |
3 |
2 |
X |
XX |
|
|
7005172 |
19207 |
A |
3 |
2 |
X |
XX |
|
|
CAGE Information
Code |
Company |
19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
1DF03 |
ABM EQUIPMENT & SUPPLY LLC DBA HIGHW |
24617 |
GENERAL MOTORS CORP |
Characteristics (Decoded)
MRC |
Requirements Statement |
Clear Text Reply |
ADAV |
OVERALL DIAMETER |
1.312 INCHES NOMINAL |
ADAV |
OVERALL DIAMETER |
1.312 INCHES NOMINAL |
MATT |
MATERIAL |
STEEL COMP 1020 OVERALL |
ABNM |
THICKNESS |
0.250 INCHES NOMINAL |
AAGR |
CROSS-SECTIONAL SHAPE STYLE |
RECTANGULAR |
ABMX |
CENTER HOLE SHAPE STYLE |
ROUND |
ABMW |
PERIPHERAL SHAPE STYLE |
ROUND |
AAUB |
HOLE DIAMETER |
0.812 INCHES NOMINAL |
MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
Similar Parts