NIIN Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| FF-N-836 | 81348 | M | 5 | 9 | 4 | KZ | ||
| LD114-0006-0005 | 43999 | A | 3 | 2 | A | ZZ | ||
| 1N7-8A | 43999 | A | 5 | 9 | 5 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 43999 | BOEING COMPANY THE DBA BOEING DIV DE |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BZRR | THREAD SERIES | UNF |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 2 TEMPER AND 2 GRADE |
| AGGP | DRILLED HOLE DIAMETER | 0.070 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| ASDB | WIDTH ACROSS FLATS | 0.738 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION H |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| ACTA | NUT STYLE | HEXAGON |
| CQFM | HARDNESS RATING | 80.0 ROCKWELL B MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| ALET | HOLE TYPE AND QUANTITY | 3 DRILLED |
| CRSQ | COUNTERSINK ANGLE | 110.0 DEGREES NOMINAL NUT |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ADEA | NUT HEIGHT | 0.250 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |