NIIN Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 22-65-11 | 72447 | A | 3 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 72447 | DANA COMMERCIAL VEHICLE MANUFACTURIN |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| ABHP | OVERALL LENGTH | 10.094 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.8750 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.8750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMGS | SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.281 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 1.875 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | HSECOND HOLE SAME AS FIRST,0.875 IN. DISTANCE BETWEEN HOLE CENTERS; TWO SLOTS 1.875 IN. LG,0.438 IN. WIDE,0.250 IN. DEEP,3188 IN. IN FROM FIRST END TO CENTER OF SLOT 1.000 IN. CENTER TO CENTER OF SLOTS |