NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 209280 | 77237 | A | 3 | 2 | 5 | ZZ | ||
| 209280 | 12603 | R | 5 | 9 | 2 | AX | ||
| 07-209280 | 16662 | A | 5 | 2 | 5 | AX | ||
| WT263-2 | 31204 | A | 5 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 12603 | CLARK EQUIPMENT CO |
| 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
| 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN |
| 31204 | PERFECTION CLUTCH |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| ABHP | OVERALL LENGTH | 18.047 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 2.719 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 11 |
| AMFZ | SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 1.1240 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL |