NIIN Output Data
NIIN:
NSN:
Item Name:
VALVE , SAFETY RELIEF
Definition:
A VALVE DESIGNED TO AUTOMATICALLY RELEASE EXCESSIVE PRESSURES. IT IS ACTUATED BY STATIC PRESSURE UPSTREAM OF THE VALVE AND IS USED AS A SAFETY VALVE OR RELIEF VALVE, AND MAY BE SET TO CLOSE AT A PREDETERMINED PRESSURE. IT IS NOT DESIGNED FOR REGULATION OF CONTINUOUSLY FLUCTUATING LOADS. IT MAY BE INLINE OR CARTRIDGE (MANIFOLD) DESIGN. EXCLUDES VALVE (1), RELIEF, PRESSURE AND TEMPERATURE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2700271-2 | 92003 | A | 3 | 2 | 5 | MB | ||
| 2700271-2A | 92003 | A | 3 | 2 | 5 | MB |
CAGE Information
| Code | Company |
|---|---|
| 92003 | PARKER HANNIFIN CORPORATION DIV AERO |
Federal Supply Class
Title
VALVES, NONPOWERED
Inclusions:
INCLUDES AUTOMATIC NONPOWERED VALVES; GATE, GLOBE, ANGLE, CHECK, AND RELIEF VALVES; COCKS.
Exclusions:
EXCLUDES FIRE HYDRANTS (FSC 4210); SPRINKLER HEADS (FSC 4210); VALVES SPECIFICALLY DESIGNED FOR USE WITH FIRE FIGHTING EQUIPMENT (FSC 4210); PLUMBING EQUIPMENT, AND THE LIKE (FSC 4540).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQGM | MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| CQGM | MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| AQLR | VALVE OPERATION METHOD | AUTOMATIC |
| ADZH | RENEWABLE SEAT RING TYPE | THREADED |
| ADSY | VALVE DISCHARGE FLOW RATE | 200.0 GALLONS PER MINUTE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AWLS | CONNECTION TYPE | FLANGE 1ST END |
| STYL | STYLE DESIGNATOR | ERR-090 |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ADQU | FLOW CONTROL DEVICE | POPPET |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| ADSU | DISK LOADING METHOD | SPRING |
| CSDC | OPENING PRESSURE SETTING | 40.0 POUNDS PER SQUARE INCH |
| AGAV | END ITEM IDENTIFICATION | VALVE BODY MACHINING PROCESS; T.O. 6J15-8-123-3 |
| CWDF | FLANGE FACE DESIGN | RECESSED STRAIGHT 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| CWDP | RECESS NOMINAL DIAMETER | 2.000 INCHES 1ST END |