NIIN Output Data
Definition:
AN ITEM CONSISTING OF A CASING WITH FITTINGS AND ATTACHMENTS ON EACH END AND A SPIRALLY WOUND WIRE CORE WITH FORMED END(S) AND/OR CRIMPED ON END FITTINGS. IT IS DESIGNED TO TRANSMIT ROTARY MOTION AROUND BENDS FROM A MOTOR OR OTHER POWER SOURCE TO DRIVE VARIOUS TYPES OF EQUIPMENT, SUCH AS TACHOMETERS, SPEEDOMETERS, REMOTE CONTROLS, INSTRUMENTS, AND THE LIKE, WHICH ARE LOCATED AT AN ANGLE AND/OR DISTANCE FROM THE POWER SOURCE. SEE ALSO CONTROL ASSEMBLY, PUSH-PULL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 14312Y | 0KZS2 | A | 3 | 2 | 5 | SB | ||
| 695500-3 | 98897 | A | 5 | 2 | X | XX | ||
| 14312Y | 97945 | H | 5 | 9 | 5 | SB | ||
| LA1779-34 | 97945 | H | 5 | 9 | 5 | SB | ||
| LA1779-34 | 0KZS2 | A | 5 | 2 | 5 | SB |
CAGE Information
| Code | Company |
|---|---|
| 0KZS2 | S.S. WHITE TECHNOLOGIES INC. |
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
| 97945 | PENNWALT CORP S S WHITE INDUSTRIAL P |
Federal Supply Class
Title
MISCELLANEOUS AIRCRAFT ACCESSORI
Inclusions:
INCLUDES CONTROL ASSEMBLIES, PUSH-PULL; BRACE, POSITIONING CARGO RAMP STOWED ON BOARD; COCKPIT MOUNTED CONTROL QUADRANTS; ACTUATORS, ELECTRO-MECHANICAL AND MECHANICAL; VENTILATORS; RELIEF TUBES; MAP HOLDERS; AERIAL GLIDER TOWING ACCESSORIES ATTACHED TO AIRCRAFT; BELTS, SAFETY AND LAP; HARNESS, SHOULDER AND SAFETY; LITTER ATTACHING SUPPORTS;ELECTRIC WINDSHIELD WIPERS;AIRCRAFT ONBOARD INERT GAS GENERATORS;AIRCRAFT FURNITURE;AIRCRAFT MOUNTED WINCHES AND HOISTS;IN-FLIGHT REFUELING SYSTEM COMPONENTS, INCLUDING FUEL COMPONENTS;AIRCRAFT CURTAINS;CABLE TENSION REGULATORS;SUN VISORS;REAR-VIEW MIRRORS;MECHANICAL TRANSMISSIONS, GEARBOXES AND CONSTANT SPEED DRIVES SPECIALLY DESIGNED FOR AIRCRAFT.
Exclusions:
EXCLUDES ENGINE MOUNTED CONTROL ASSEMBLIES; FITTED COVERS, AIRCRAFT PYLONS; HELICOPTER ROTER BRAKE SYSTEM COMPONENTS; HELICOPTER AUTOMATIC STABILIZATION EQUIPMENT.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BPPL | WRENCHING FACILITY TYPE | HEXAGON SECOND END |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON SECOND END |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| AXYS | SPLINE TYPE | INVOLUTE SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND SECOND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND FIRST END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| ABUJ | THREAD SIZE (NON-CORE) | ERR-070 |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| ABHP | OVERALL LENGTH | 34.437 INCHES NOMINAL |
| BJPS | CASING MATERIAL | PHOSPHOR BRONZE |
| AXFH | SPLINE LENGTH | 0.437 INCHES NOMINAL FIRST END |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| AXFH | SPLINE LENGTH | 0.437 INCHES NOMINAL SECOND END |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| CFRQ | CASING OUTSIDE DIAMETER | 0.360 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 SECOND END |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL SECOND END |
| CFSM | STRENGTH RATING CHARACTERISTICS (NON-CORE) | 100.0 FOOT-POUNDS BREAKING LOAD EITHER DIRECTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS FIRST END |
| ASDB | WIDTH ACROSS FLATS | 0.750 INCHES NOMINAL FIRST END |
| CFRR | CASING PROTECTIVE DEVICE TYPE | BRAIDED WIRE SHIELD |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNS SECOND END |
| AAJD | THREAD CLASS | 2B FIRST END |
| BPPL | WRENCHING FACILITY TYPE | HEXAGON FIRST END |