NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| NAFB5654A | 82796 | A | 5 | 2 | 4 | AX | ||
| 16102287 | 82796 | A | 3 | 2 | 6 | AX | ||
| CAFB5654A | 82796 | A | 5 | 2 | 4 | AX |
CAGE Information
| Code | Company |
|---|---|
| 82796 | COLTEC INDUSTRIES INC. DBA FAIRBANKS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AKTM | FIRST END SLOT WIDTH | 0.188 INCHES NOMINAL |
| AMHD | SECOND END HOLE DEPTH | 1.000 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SLOTTED |
| ABHP | OVERALL LENGTH | 7.250 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| AMDW | FIRST END SLOT DEPTH | 0.125 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 2.000 INCHES NOMINAL |
| AMHZ | SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | TWO CROSS DRILLED HOLES AND EXTERNALLY THREADED |
| AMDL | FIRST END DIAMETER | 2.0000 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.313 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 4 |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.625 INCHES NOMINAL |