NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 438046-3 | 37695 | A | 5 | 2 | A | TX | ||
| 3040004027900 | SCY13 | A | 5 | 9 | 9 | YP | ||
| SM-D-374916-3 | 05584 | A | 5 | 2 | 5 | TX | ||
| SM-D-374916-3 | 80063 | A | 3 | 2 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 05584 | AUTODYNE MANUFACTURING CO. INC. |
| 37695 | RAYTHEON COMPANY DBA RAYTHEON |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | PLASTIC OR STEEL CORROSION RESISTING |
| MATT | MATERIAL | PLASTIC OR STEEL CORROSION RESISTING |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 3.300 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.156 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0030 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.2200 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.2495 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 0.220 INCHES NOMINAL |