NIIN Output Data
NIIN:
NSN:
Item Name:
SCREW , CLOSE TOLERANCE
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| NAS1153-40D |
80205 |
A |
3 |
2 |
4 |
SE |
|
|
CAGE Information
| Code |
Company |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES GRIP |
| ANEE |
GRIP LENGTH |
2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| AASL |
HEAD DIAMETER |
0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AHYM |
NOMINAL THREAD DIAMETER |
0.192 INCHES |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAWB |
SHANK UNTHREADED HOLE DIAMETER |
0.060 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| AAJD |
THREAD CLASS |
3A |
| AASA |
THREAD LENGTH |
0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1153 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CRZS |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER |
2.634 INCHES MINIMUM FIRST HOLE AND 2.684 INCHES MAXIMUM FIRST HOLE |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AASB |
FASTENER LENGTH |
2.761 INCHES MINIMUM AND 2.791 INCHES MAXIMUM |
Similar Parts