NIIN Output Data
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| C079-5-15 | 06950 | A | 3 | 2 | 5 | ZZ | ||
| SFT930-5-15 | 56878 | A | 3 | 2 | 5 | SE | ||
| VS2787T5C15 | 92215 | A | 5 | 9 | 5 | SE | ||
| AIC79-5-15 | 06725 | A | 3 | 2 | 5 | ZZ | ||
| C079-5-15 | 81755 | A | 7 | 2 | 1 | SE |
CAGE Information
| Code | Company |
|---|---|
| 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
| 06950 | ALCOA GLOBAL FASTENERS INC. DBA ALCO |
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
| 92215 | ALCOA GLOBAL FASTENERS INC. DBA ALCO |
| 81755 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES THREADS |
| ANEE | GRIP LENGTH | 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| CQFM | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM OVERALL AND 58.0 ROCKWELL C MAXIMUM OVERALL |
| AASL | HEAD DIAMETER | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL AND CADMIUM OVERALL |
| CRSQ | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAUR | GRIP DIAMETER | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| CQBC | MINIMUM TENSILE STRENGTH | 300000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.332 INCHES MINIMUM AND 0.399 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | VANADIUM ALLOY M-A,VANADIUM ALLOYS STEEL CO MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AASB | FASTENER LENGTH | 1.280 INCHES MINIMUM AND 1.327 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL |
| MATT | MATERIAL | VANADIUM ALLOY OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AHYM | NOMINAL THREAD DIAMETER | 0.312 INCHES |