NIIN Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| A103DP | K7766 | A | 3 | 2 | 5 | KE | ||
| A103DP | K4975 | A | 3 | 2 | 5 | KZ | ||
| 99-9419538 | 99995 | R | 6 | 9 | 9 | KE |
CAGE Information
| Code | Company |
|---|---|
| 99995 | NATO STOCK NUMBER ASSIGNED BY ANOTHE |
| K7766 | BRITISH STANDARDS INSTITUTION |
| K4975 | SATAIR HARDWARE UK LTD SH UK |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM FIRST END AND 120.0 DEGREES MAXIMUM FIRST END |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| ACTA | NUT STYLE | HEXAGON |
| ADEA | NUT HEIGHT | 0.157 INCHES MINIMUM AND 0.167 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | S.112 FSCM K7766 MFR REF SINGLE MATERIAL RESPONSE OVERALL OR S.92 FSCM K7766 MFR REF SINGLE MATERIAL RESPONSE OVERALL OR S.113 FSCM K7766 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| ASDB | WIDTH ACROSS FLATS | 0.339 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |