NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 968459-1 | 99193 | A | 3 | 2 | 2 | SX |
CAGE Information
| Code | Company |
|---|---|
| 99193 | HONEYWELL INTERNATIONAL INC. DBA HON |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDSR | SECOND END SPLINE QUANTITY | 11 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMGF | SECOND END PITCH DIAMETER | 0.3358 INCHES NOMINAL |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 0.6400 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 0.4800 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.2942 INCHES MINIMUM AND 0.3023 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL |
| BDSQ | FIRST END SPLINE QUANTITY | 11 |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMDL | FIRST END DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 4.830 INCHES MINIMUM AND 4.850 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| AMDS | FIRST END PITCH DIAMETER | 0.4344 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.3659 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 4 |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |