NIIN Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 20006-623D2-1 | 92755 | A | 3 | 2 | 3 | CL |
CAGE Information
| Code | Company |
|---|---|
| 92755 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFJ | SECOND END DISTANCE FROM END TO FLAT | 0.500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 303 |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| AMJA | SECOND END GROOVED FLAT LENGTH | 0.2500 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.2300 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.060 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| FEAT | SPECIAL FEATURES | 2 FLAT GROOVES ON SECOND END,LOCATED 90.0 DEGREES APART; EACH FLAT IS AS DESCRIBED |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.260 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.0290 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 10.0 MICROINCHES |
| AMJB | SECOND END GROOVED FLAT DEPTH | 0.020 INCHES NOMINAL |
| AAHP | SECOND END STYLE | FLAT GROOVED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |