NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 653174 | 36378 | R | 5 | 9 | 1 | TX | ||
| 653174 | 1PQF4 | A | 7 | 2 | 5 | ZZ | ||
| RC08-01-3773 | 04454 | A | 3 | 2 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 04454 | SENSOR SYSTEMS L.L.C. |
| 36378 | RAYTHEON TECHNICAL SERVICES COMPANY |
| 1PQF4 | L-3 COMMUNICATIONS CORPORATION DIV L |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND, STEPPED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.687 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.660 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BALL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| AEGC | SHAFT RADIAL PLAY | 0.0008 INCHES |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 9347.2 SINGLE SECTION |
| AEFY | SHAFT END PLAY | 0.0005 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 SINGLE SECTION |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 180.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.812 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 0.750 INCHES NOMINAL |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -30.0/+30.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.660 INCHES NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AECZ | MOUNTING LIP DIAMETER | 0.7500 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.500 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| AGQL | UNDERCUT LENGTH | 0.170 INCHES NOMINAL |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABPM | BODY DIAMETER | 0.750 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 333.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 6.0 |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AEDQ | UNDERCUT DIAMETER | 0.062 INCHES NOMINAL |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AEFK | MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |