NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 0N009155 |
98230 |
A |
3 |
2 |
1 |
AX |
|
|
CAGE Information
| Code |
Company |
| 98230 |
NATIONAL SECURITY AGENCY |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ABHP |
OVERALL LENGTH |
2.703 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AAGZ |
FIRST END STYLE |
PLAIN |
| MATT |
MATERIAL |
STEEL COMP 303 |
| AAHW |
SECOND END GROOVE WIDTH |
0.0190 INCHES NOMINAL |
| AMHA |
SECOND END EXTERNAL THREAD LENGTH |
0.282 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.1250 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AMDL |
FIRST END DIAMETER |
0.1250 INCHES NOMINAL |
| AAHX |
SECOND END GROOVE DIAMETER |
0.0970 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SHAFT FLATTED ON THREE SIDES 0.114 IN. W;0.188 IN. LG AT 90 DEG ANGLE;LOCATED 0.562 IN. FROM 1ST END |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.856 INCHES NOMINAL |
Similar Parts