NIIN Output Data
Definition:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| RC28-4015N | 42451 | A | 5 | 9 | 1 | HD | ||
| K162332PC2 | 01406 | H | 5 | 9 | 1 | HD | ||
| PA4872PCRC28-4015 | 82214 | A | 5 | 9 | 1 | HD | ||
| RC28-4015N | 0AHP6 | A | 3 | 2 | 1 | HD | ||
| PA4872PCRC28-4015 | 0AHP6 | A | 5 | 2 | 1 | HD |
CAGE Information
| Code | Company |
|---|---|
| 01406 | ALLIS CHALMERS CORP |
| 42451 | UCAR CARBON CO INC |
| 82214 | UNION CARBIDE CORP ELECTRONIC SPECIA |
| 0AHP6 | NATIONAL ELECTRICAL CARBON PRODUCTS |
Federal Supply Class
Title
ELECTRICAL CONTACT BRUSHES AND E
Inclusions:
INCLUDES BRUSHES FOR ELECTRICAL ROTATING EQUIPMENT; CARBON STOCK FOR BRUSHES; BRUSH ARM AND HOLDERS; LIGHTING ELECTRODES.
Exclusions:
EXCLUDES ANODES; CATHODES; WELDING ELECTRODES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABRY | LENGTH | 2.750 INCHES NOMINAL |
| CQPY | BEVEL ANGLE | 15.0 DEGREES NOMINAL |
| CQGT | CONTACT FACE STYLE | BEVELED |
| AHXR | TERMINAL SLOT WIDTH | 0.219 INCHES NOMINAL |
| CRBG | SHUNT INSULATION PROVISION AND QUANTITY | 4 UNINSULATED |
| ABNM | THICKNESS | 0.875 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | UNION CARBIDE CORP,CARBON PRODUCTS DIV,GR SA-45 MFR REF SINGLE MATERIAL RESPONSE |
| AHXP | BRUSH SHUNT LENGTH | 4.500 INCHES NOMINAL ALL SHUNTS |
| TTQY | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/SLOT |
| AAQL | BODY STYLE | RECTANGULAR COMMUTATOR |
| BTHR | TOP STYLE | BEVELED FRONT |
| FEAT | SPECIAL FEATURES | CENTER OF CLIP TURNED UP 0.250 IN. W 0.188 IN. LG IN LINE WITH BACK OF BRUSH |
| CRTL | CRITICALITY CODE JUSTIFICATION | MATT AND MDCL |
| AABU | SHUNT POSITION DESIGNATOR | 7 AND 1 AND 3 AND 9 |
| MATT | MATERIAL | ELECTROGRAPHITIC |
| STYL | STYLE DESIGNATOR | SPLIT |
| CRMK | ANGLE | 20.0 DEGREES NOMINAL |
| CQYQ | CLIP TYPE | NEMA HAMMER TYPE A |
| AACQ | PERIPHERAL SPEED | 8000 FEET PER MINUTE |
| ABGL | WIDTH | 1.250 INCHES NOMINAL |