NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 1225686 | 10001 | A | 3 | 2 | 1 | TX | ||
| NL5439-195-0 | 73138 | A | 5 | 2 | 6 | TX | ||
| 61-966 | 56232 | A | 5 | 2 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
| 73138 | BI TECHNOLOGIES CORPORATION |
| 56232 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AAVL | PILOT DIAMETER | 1.5520 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 9.0 2ND SECTION AND 268.0 1ST SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS |
| AAPN | SECTION QUANTITY | 4 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 9.0 4TH SECTION AND 268.0 4TH SECTION |
| AEGC | SHAFT RADIAL PLAY | 0.0015 INCHES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+1.00 ALL SECTIONS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEFZ | SHAFT RUNOUT | 0.0005 INCHES |
| ABPM | BODY DIAMETER | 1.780 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 1.60 INCH-OUNCES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 ALL SECTIONS |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| APXH | TERMINAL LOCATION | LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 277.0 1ST SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0/+1.0 DEG ANGULAR ROTATION ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABPA | UNDERCUT DIAMETER | 1.562 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 2ND SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 2 4TH SECTION |
| AEGA | LATERAL RUNOUT | 0.0025 INCHES |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AECZ | MOUNTING LIP DIAMETER | 1.7800 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 17 TURRET |
| AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |