NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
---|---|---|---|---|---|---|---|---|
16601755 | 82796 | A | 3 | 2 | 4 | AX | ||
C6717AFBGC | 82796 | A | 5 | 9 | 5 | AX | ||
N6717AFBGC | 82796 | A | 5 | 9 | 5 | AX |
CAGE Information
Code | Company |
---|---|
82796 | COLTEC INDUSTRIES INC. DBA FAIRBANKS |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
AAHN | END SIMILARITY | NOT IDENTICAL |
AMDL | FIRST END DIAMETER | 0.4910 INCHES NOMINAL |
AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED |
AAHX | SECOND END GROOVE DIAMETER | 0.6970 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 4.236 INCHES NOMINAL |
AMGR | SECOND END SLOT DEPTH | 0.562 INCHES NOMINAL |
AAHW | SECOND END GROOVE WIDTH | 0.0937 INCHES NOMINAL |
CSPY | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
MATT | MATERIAL | STEEL |
ATPC | STEP QUANTITY | 3 |
FEAT | SPECIAL FEATURES | 0.875 IN. LONG PIN THRU CROSS DRILLED HOLE IN 1ST END |
AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
AMDX | FIRST END HOLE DIAMETER | 0.1875 INCHES NOMINAL |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.1562 INCHES NOMINAL |
AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.205 INCHES NOMINAL |
AKTN | SECOND END SLOT WIDTH | 0.196 INCHES NOMINAL |