NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| GAN6614 |
57526 |
A |
5 |
2 |
5 |
ZZ |
|
|
| 6258358 |
19207 |
A |
5 |
2 |
1 |
AZ |
|
|
| GAN6614 |
23040 |
R |
3 |
9 |
1 |
AX |
|
|
CAGE Information
| Code |
Company |
| 19207 |
U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 57526 |
FORD MOTOR CO |
| 23040 |
FORD MOTOR CO FORD PARTS AND SERVICE |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| BDSR |
SECOND END SPLINE QUANTITY |
12 |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.240 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMGS |
SECOND END HOLE DIAMETER |
0.1410 INCHES NOMINAL |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
0.5580 INCHES NOMINAL |
| AMGA |
SECOND END SPLINE LENGTH |
0.750 INCHES NOMINAL |
| AMDG |
FIRST END KEYWAY DEPTH |
0.100 INCHES NOMINAL |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.4750 INCHES NOMINAL |
| AMCZ |
FIRST END KEYWAY WIDTH |
0.1250 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.5600 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
INDENTED FLAT KEYWAY |
| AMHD |
SECOND END HOLE DEPTH |
0.559 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
3 |
| CSPY |
LARGEST STEP DIAMETER |
0.680 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.5600 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
6.000 INCHES NOMINAL |
| AMDE |
FIRST END EXTERNAL KEYWAY LENGTH |
0.820 INCHES NOMINAL |
| AMDH |
FIRST END DISTANCE FROM KEYWAY CENTER TO END |
1.290 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4140 |
| AAHP |
SECOND END STYLE |
CROSS DRILLED HOLE AND SPLINED (STRAIGHT) |
Similar Parts