NIIN Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 10905236 | D5589 | R | 5 | 9 | 9 | ZG | ||
| 10905236 | D9893 | A | 5 | 9 | 9 | ZG | ||
| 10905236 | 19207 | A | 3 | 2 | 1 | BF | ||
| 25704-281210-50-0 | D1839 | A | 5 | 2 | 3 | ZG | ||
| 25704-281210-50-0 | D2692 | A | 5 | 2 | 6 | ZG |
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| D5589 | FEINMECHANISCHE WERKE MAINZ GMBH |
| D9893 | LIEBHERR AEROSPACE LINDENBERG GMBH |
| D1839 | BUNDESAMT FUER WEHRTECHNIK UND BESCH |
| D2692 | KRAUSS-MAFFEI WEGMANN GMBH & CO. KG |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | EACH END HAS A HOLE DRILLED 2.310IN DEEP AND 0.500 IN DIA;SHAFT HAS TWOINTERSECTING INTERNALLY THREADED HOLESDRILLED ON 2.880 IN CENTER:1-HOLE 0.250 DIA 20 UNC-3B:1-HOLE 0.250 DIA 28UNF-3B;SHAFT HAS 1.750 IN CUTOUT OF ONE SIDE;FINAL PROTECTIVE FINISH:TIN PLATING,TYPE 1,PER MIL-T-10727,0.0002 IN TO 0.0004 IN. THICK |
| AMDL | FIRST END DIAMETER | 0.7868 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.520 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | TWO INDENTED FLAT KEYWAYS |
| AMDG | FIRST END KEYWAY DEPTH | 0.030 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1015 |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.380 INCHES NOMINAL |
| AMFE | FIRST END ANGLE BETWEEN KEYWAYS | 45.0 DEGREES NOMINAL |
| ABHP | OVERALL LENGTH | 5.750 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1200 INCHES NOMINAL |