NIIN Output Data
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 204-010-767-1 | 97499 | A | 3 | 2 | 1 | CT | ||
| 204-010-767-001 | 97499 | A | 5 | 2 | 5 | 9Z | ||
| VBP4233-3 | 53037 | A | 5 | 9 | 5 | CT |
CAGE Information
| Code | Company |
|---|---|
| 53037 | H C MERCHANDISERS INC. DBA H C PACIF |
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 416,COND 4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6758,COMP 4130,COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADEA | NUT HEIGHT | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.812 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION A |
| AGGP | DRILLED HOLE DIAMETER | 0.080 INCHES NOMINAL |
| CRSQ | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM FIRST END AND 110.5 DEGREES MAXIMUM FIRST END |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL OR BPS FW4007,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR PASSIVATE OVERALL |
| CRTM | BEARING SURFACE TYPE | ANY ACCEPTABLE |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL OVERALL |
| ASDB | WIDTH ACROSS FLATS | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 109.5 DEGREES MINIMUM SECOND END AND 110.5 DEGREES MAXIMUM SECOND END |
| ACTA | NUT STYLE | HEXAGON |
| FEAT | SPECIAL FEATURES | MAX SURFACE FINISH,ALL SURFACES 125 MICROINCH AA,COUNTERSINK ID T0 0.812 IN. DIA ON EACH SIDE |
| CMLP | THREAD QUANTITY PER INCH | 20 |