NIIN Output Data
NIIN:
NSN:
Item Name:
CYLINDER ASSEMBLY , HYDRAULIC BRAK
Definition:
A DEVICE CONSISTING OF A CYLINDER, HYDRAULIC BRAKE, WHEEL WITH A PISTON(S) AND OTHER COMPONENT PARTS WHICH IS MOUNTED TO THE BACK PLATE OF A WHEEL. IT USES THE FLOW AND PRESSURE OF A FLUID TO CREATE THE LINEAR MOTION REQUIRED TO OPERATE THE BRAKE SHOES OF A HYDRAULIC BRAKE SYSTEM.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 172-377 | 76462 | A | 5 | 2 | 5 | AX | ||
| WC28851 | 76761 | A | 5 | 9 | 5 | AX | ||
| 28851 | 19239 | A | 5 | 2 | 5 | AX | ||
| 172-377 | 16758 | A | 5 | 2 | 6 | AX | ||
| 5461560 | 7X677 | A | C | 1 | 5 | ZZ | 9X | |
| 3257 | 14894 | F | 5 | 9 | 6 | AX | ||
| FD28851 | 63477 | A | 5 | 2 | 4 | TG | ||
| B8T2262A | 57526 | A | C | 1 | 5 | ZZ | 9F | |
| B8T2262A | 23040 | R | 3 | 9 | 5 | AX | ||
| 3257 | 06840 | H | 5 | 9 | 5 | AX | ||
| EW16892 | 80724 | F | 5 | 9 | 5 | AX | ||
| 5461560 | 23862 | A | 5 | 9 | 5 | AX | ||
| 2084407 | 12204 | A | 5 | 2 | 5 | AX | ||
| FD18692 | 63477 | A | C | 1 | 5 | ZZ | AC | |
| W28851 | 71425 | A | 5 | 2 | 5 | AX | ||
| WC28851 | 66614 | A | 5 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 06840 | BENDIX CORP THE |
| 76462 | DELCO MORAINE DIV OF GENERAL MOTORS |
| 76761 | C. E. NIEHOFF & CO. |
| 19239 | ECHLIN INC |
| 16758 | GENERAL MOTORS CORP DELCO ELECTRONIC |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| 14894 | ALLIED AUTOMOTIVE ALLIED AFTERMARKET |
| 63477 | FEDERAL MOGUL CORP SUB WAGNER BRAKE |
| 57526 | FORD MOTOR CO |
| 23040 | FORD MOTOR CO FORD PARTS AND SERVICE |
| 80724 | EIS BRAKE PARTS DIV OF STANDARD MOTO |
| 23862 | MILITARY VEHICLES OPN GENERAL MOTORS |
| 12204 | DAIMLER CHRYSLER |
| 71425 | AIRTEX PRODUCTS DIV OF UIS INC |
| 66614 | TRW INC REPLACEMENT PARTS DIV |
Federal Supply Class
Title
VEHICULAR BRAKE, STEERING, AXLE,
Inclusions:
INCLUDES TURRENT BRAKES; CLUTCH BRAKES, TANK TURRET.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CLMX | PORT THREAD DIAMETER | 0.375 INCHES NOMINAL |
| ABDR | MOUNTING PROVISION | THREADED MOUNTING HOLES |
| AMQZ | COMPRESSED LENGTH | 6.000 INCHES NOMINAL |
| CLLZ | SECOND PISTON ROD END LUBRICATION FACILITY (NON-CORE) | NOT INCLUDED |
| CDTG | MOUNTING FACILITY THREAD QUANTITY PER INCH | 18 |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMT | PORT STYLE | GASKET SEAL |
| ABXV | BORE DIAMETER | 1.490 INCHES NOMINAL |
| AKBN | MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| ASBP | BORE TYPE | STRAIGHT |
| CDTF | MOUNTING FACILITY THREAD DIAMETER | 0.312 INCHES NOMINAL |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| AAFZ | BODY MATERIAL | STEEL |
| CLMS | PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| CLLP | PISTON ROD END SIMILARITY | IDENTICAL |
| CLNB | PORT THREAD CLASS | 2B |
| CDTD | MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| ABKW | OVERALL HEIGHT | 2.125 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 24 |
| CLMD | FIRST END FORK WIDTH | 0.500 INCHES NOMINAL |
| CLMG | FIRST END FORK DEPTH | 0.344 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CKSF | FIRST PISTON ROD END STYLE | SLOT TYPE |
| CLND | BLEEDING FEATURE QUANTITY | 1 |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 2.000 INCHES NOMINAL |
| CLMJ | FIRST END FORK SPAN WIDTH | 0.281 INCHES NOMINAL |
| CLLN | FIRST PISTON ROD END LUBRICATION FACILITY (NON-CORE) | NOT INCLUDED |
| BBJX | MOUNTING POSITION | ANY ACCEPTABLE |
| ABMK | OVERALL WIDTH | 3.562 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 7.750 INCHES NOMINAL |
| AKBM | MOUNTING FACILITY THREAD CLASS | 2A |
| ADAR | BODY OUTSIDE DIAMETER | 2.020 INCHES NOMINAL |
| CLMN | MOUNTING FACILITY THREAD LENGTH | 0.750 INCHES NOMINAL |