NIIN Output Data
Definition:
A VALVE HAVING TWO OR MORE PORTS WITH VALVE STEM OR PILOT NEEDLE IN A NORMALLY OPEN OR CLOSED POSITION. IT IS SPECIFICALLY DESIGNED TO STOP OR START OR CHANGE THE FLOW OF FLUID BY MEANS OF THE MAGNETIC ACTION OF AN ELECTRIC COIL ON A MOVEABLE CORE OR PLUNGER. THE VALVE MAY BE EQUIPPED WITH A MANUAL OPENING OR CLOSING DEVICE. FOR ITEMS WITH THREE OR MORE PORTS THAT UTILIZE A RECIPROCATING SLIDE WITH RECESS AREAS WHICH MATE WITH PORTS IN AN INTEGRAL OR REPLACEABLE PORTED SLEEVE, SEE VALVE (1), LINEAR, DIRECTIONAL CONTROL. IT MAY BE INLINE OR CARTRIDGE (MANIFOLD) DESIGN. EXCLUDES VALVE (1), BUTTERFLY.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| V5L-7490 | 81978 | A | 3 | 2 | 5 | AX | ||
| V5-7490 | 81978 | A | 5 | 9 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 81978 | PARKER-HANNIFIN CORPORATION DBA FLUI |
Federal Supply Class
Title
VALVES, POWERED
Inclusions:
INCLUDES ELECTRIC MOTOR OPERATED VALVES; HYDRAULIC OPERATED VALVES; SOLENOID OPERATED VALVES.
Exclusions:
EXCLUDES ENGINE INTAKE AND EXHAUST VALVES (FSC 2990, 2815); VALVES SPECIFICALLY DESIGNED FOR USE WITH FIRE FIGHTING EQUIPMENT (FSC 4210); PLUMBING EQUIPMENT, AND THE LIKE (FSC 4540).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABVL | APERTURE DIAMETER | 0.094 INCHES NOMINAL |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AMPS | CURRENT RATING IN AMPS | 0.803 |
| AQLR | VALVE OPERATION METHOD | SOLENOID |
| BBJX | MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| CQGM | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| AWLS | CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| ADQU | FLOW CONTROL DEVICE | DISK |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| ADSK | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED |
| STYL | STYLE DESIGNATOR | ERR-090 |
| CQJX | NOMINAL THREAD SIZE | 0.125 INCHES 2ND END |
| MATT | MATERIAL | STEEL CORROSION RESISTING BODY |
| AAJF | THREAD DIRECTION | RIGHT-HAND ALL ENDS |
| THSD | THREAD SERIES DESIGNATOR | NPT 2ND END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AHNC | CONNECTION STYLE | ERR-090 1ST END |
| AAJD | THREAD CLASS | 2A 1ST END |
| AHNC | CONNECTION STYLE | ERR-090 2ND END |
| CQCP | INLET/OUTLET OPERATING PRESSURE DIFFERENTIAL | 125.0 POUNDS PER SQUARE INCH NOMINAL |
| CSBH | VOLTAGE IN VOLTS AND CURRENT TYPE | 120.00 AC |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE |
| FAAZ | PHASE | SINGLE |