NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , STRAIGHT
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 4H9722 |
11083 |
A |
3 |
2 |
2 |
AX |
|
|
CAGE Information
| Code |
Company |
| 11083 |
CATERPILLAR INC. DBA CATERPILLAR DIV |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
1.250 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMFZ |
SECOND END DIAMETER |
0.9985 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
UNTHREADED CROSS DRILLED |
| FEAT |
SPECIAL FEATURES |
SECOND END BORED,0.375 IN. BORE DIA,1.375 IN. BORE DP |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES |
| AMDL |
FIRST END DIAMETER |
0.9985 INCHES NOMINAL |
| AMDZ |
FIRST END DISTANCE FROM HOLE CENTER TO END |
0.500 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AMGS |
SECOND END HOLE DIAMETER |
0.1880 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
2.562 INCHES NOMINAL |
| AMDX |
FIRST END HOLE DIAMETER |
0.3120 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
UNTHREADED CROSS DRILLED |
| AMEB |
FIRST END HOLE DEPTH |
0.188 INCHES NOMINAL |
| AMHD |
SECOND END HOLE DEPTH |
0.499 INCHES NOMINAL |
Similar Parts