NIIN Output Data
Definition:
A THIN FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID OR LAMINATED CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE AND HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. ITEMS WITH EITHER (1) A SOLID (NOT LAMINATED) CROSS-SECTION, OR (2) A NON-SEPARABLE LAMINATED CROSS-SECTION WITH ONE HOLE CENTRALLY LOCATED, MUST HAVE A THICKNESS LESS THAN 0.006 INCH (0.152 MM) FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS, AND LESS THAN 0.016 INCH (0.406 MM) FOR ITEMS 1/4 INCH (6.35 MM) OR MORE OUTSIDE DIAMETER, OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS. FOR ITEMS WITH THICKNESS GREATER THAN THOSE INDICATED ABOVE, SEE SPACER, PLATE; WASHER, FLAT AND SPACER, RING. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SHORTEST DISTANCE ACROSS PERIPHERAL FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. SEE ALSO SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; AND BEARING, WASHER, THRUST.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 268797 | 24617 | A | 5 | 9 | X | XX | ||
| 268797 | 52788 | R | 3 | 9 | 1 | AX | ||
| 268797 | 52793 | A | 5 | 2 | X | XX | ||
| 268797 | 7X677 | A | 5 | 2 | 5 | ZZ | ||
| 268797 | 0A335 | A | 5 | 2 | 1 | ZZ | ||
| 3967P11 | 27618 | A | 5 | 2 | X | XX | ||
| 7342614 | 19207 | A | 5 | 2 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 0A335 | LINEAR MOTION LLC |
| 24617 | GENERAL MOTORS CORP |
| 52788 | GENERAL MOTORS CORP SAGINAW DIV |
| 52793 | SAGINAW PRODUCTS CORPORATION DBA CIG |
| 7X677 | GENERAL MOTORS LLC DBA GENERAL MOTOR |
| 27618 | TAYLOR MACHINE WORKS INC. |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCF | CONSTRUCTION | ONE-PIECE |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.438 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.625 INCHES NOMINAL |
| ABVL | APERTURE DIAMETER | 3.031 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 3.625 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | END PLATE STEERING GEAR AMPHIBIAN TRUCK |
| MATT | MATERIAL | STEEL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.438 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 4 |
| ABHP | OVERALL LENGTH | 4.500 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.438 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 3.500 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.938 INCHES NOMINAL |