NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7372867 | 19207 | A | 5 | 2 | 5 | AX | ||
| A1727 | 34623 | A | 3 | 2 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 34623 | AM GENERAL LLC |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | SPHERICAL POCKET,0.437 IN. TO 0.440 IN. DIA IN SHAFT END |
| AMHL | SECOND END BEARING SEAT DIAMETER | 1.190 INCHES MINIMUM AND 1.192 INCHES MAXIMUM |
| AMHM | SECOND END DISTANCE FROM BEARING SEAT TO END | 2.813 INCHES NOMINAL |
| BNTC | FIRST END FACILITY WIDTH | 0.033 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.688 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.950 INCHES MINIMUM AND 0.960 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 1.375 INCHES NOMINAL |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMQF | SECOND END TYPE | SPLINED |
| MATL | MATERIAL | STEEL, SAE 4137 |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| BBCD | FIRST END SPLINE QUANTITY | 6 |
| BNTD | FIRST END FACILITY LOCATION | LOCATED 1.303 IN. MIN 1.317 IN. MAX FROM SHAFT END,@2.391 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | INCLUDED |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| AMQA | FIRST END TYPE | SPLINED |
| AETC | METALLIC HARDNESS RATING | 38.0 MINIMUM ROCKWELL C AND 43.0 MAXIMUM ROCKWELL C |
| BNTW | SECOND END BEARING SEAT WIDTH | 0.875 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 1.130 INCHES MINIMUM AND 1.136 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 14.156 INCHES NOMINAL |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNPJ | FIRST END FACILITY DIAMETER | 1.090 INCHES MINIMUM AND 1.095 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.915 INCHES MINIMUM AND 0.957 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.113 INCHES MINIMUM AND 1.120 INCHES MAXIMUM |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE AND SHOULDER |