NIIN Output Data
NIIN:
NSN:
Item Name:
GEAR , SPUR
Definition:
A GEAR, CYLINDRICAL IN FORM, WITH STRAIGHT TEETH ON THE OUTER SURFACE PARALLEL TO THE AXIS OF THE GEAR. SEE ALSO GEAR, ANTIBACKLASH, SPUR. FOR BULK MATERIAL, SEE ROD, PINION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| A15045 | 34623 | A | 5 | 2 | X | XX | ||
| 7697468 | 19207 | A | 5 | 2 | X | XX | ||
| A0015045 | 22852 | F | 5 | 9 | 5 | AX | ||
| J2A12 | 79410 | A | 5 | 9 | X | XX | ||
| 18-8-17 | 72447 | A | 3 | 2 | X | XX | ||
| 18-8-17 | 95019 | A | 5 | 2 | X | XX | ||
| 18-8-17 | 03716 | F | 5 | 9 | 5 | AX |
CAGE Information
| Code | Company |
|---|---|
| 03716 | T AND J INDUSTRIES INC |
| 34623 | AM GENERAL LLC |
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
| 22852 | SPALLA INC |
| 79410 | LIBERTY VENTURES INTI LLC |
| 72447 | DANA COMMERCIAL VEHICLE MANUFACTURIN |
| 95019 | DANA CORP SPICER TRANSMISSION DIV |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGJS | PITCH DIAMETER | 5.5714 INCHES NOMINAL |
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID |
| MATT | MATERIAL | STEEL COMP 8620H OVERALL |
| CWTX | HUB NOMINAL DIAMETER | 2.500 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| ABSA | SPLINE QUANTITY | 12 BOTH ENDS |
| CWXY | FIRST GROOVE NOMINAL WIDTH | 0.380 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.775 INCHES |
| CWRM | FACE NOMINAL WIDTH | 0.625 INCHES |
| CWPP | PRESSURE ANGLE | 22.5000 DEGREES |
| AJLA | TEETH QUANTITY | 39 |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWFR | NOMINAL OVERALL LENGTH | 1.250 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66,AISI/SAE,8620 H FED STD SINGLE MATERIAL RESPONSE OVERALL |
| CWWN | END NOMINAL DIAMETER | 3.000 INCHES FIRST END |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | 0.188 INCHES FIRST END |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 59.0 ROCKWELL C MINIMUM OVERALL AND 62.0 ROCKWELL C MAXIMUM OVERALL |
| CWTR | HUB STYLE DESIGNATOR | 1 GROOVE FIRST END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.093 INCHES SECOND END |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | 2.435 INCHES FIRST END |
| CWNH | TOOTH FORM | STANDARD |