NIIN Output Data
NIIN:
NSN:
Item Name:
ATTENUATOR , VARIABLE
Definition:
A DEVICE FOR REDUCING THE STRENGTH OF AN ALTERNATING CURRENT SIGNAL EITHER CONTINUOUSLY OR IN STEPS, WITHOUT CAUSING APPRECIABLE SIGNAL DISTORTION, BY MAINTAINING SUBSTANTIALLY CONSTANT OUTPUT AND/OR INPUT IMPEDANCE MATCH. CONTINUOUSLY VARIABLE RESISTIVE DEVICES MUST CONSIST OF AT LEAST TWO SECTIONS OR ONE SECTION WITH AT LEAST TWO ROTATING CONTACTS. THE ITEM MUST HAVE AN OVERALL ATTENUATION RATING. INCLUDES TANDEM MOUNTED VARIABLE RESISTORS DESIGNED TO FUNCTION AS AN ATTENUATOR BUT WHOSE TERMINALS ARE NOT CONNECTED. SEE ALSO RESISTOR, VAIABLE (AS MODIFIED).
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 48454-1 | 82340 | A | 3 | 2 | 1 | TX | ||
| 10358 | 28057 | A | 5 | 2 | 5 | TX | ||
| 10358 | 58880 | A | 5 | 9 | 3 | TX |
CAGE Information
| Code | Company |
|---|---|
| 28057 | SHALLCO INC. |
| 82340 | EDO CORPORATION DIV DEFENSE SYSTEMS |
| 58880 | MEGGITT NEW HAMPSHIRE INC |
Federal Supply Class
Title
ANTENNAS, WAVEGUIDES, AND RELATE
Inclusions:
INCLUDES AERIALS; MASTS; TOWER EQUIPMENT; ATTENUATORS; COUPLERS; TRANSMISSION LINES.
Exclusions:
EXCLUDES TOWER STRUCTURES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | "T" "007765005 |
| ASYD | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0/+60.0 |
| BNGR | FREQUENCY RANGE | 0.000 HERTZ MINIMUM AND 50.000 KILOHERTZ MAXIMUM |
| AAFS | APPLICATION DESIGN | AUDIO |
| ABMK | OVERALL WIDTH | 2.734 INCHES NOMINAL |
| AJDB | POWER RATING | 0.5 WATTS AVERAGE |
| AAQL | BODY STYLE | CYLINDRICAL W/SIDE TERMINALS |
| ADAQ | BODY LENGTH | 2.063 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.344 INCHES MAXIMUM |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| ABXF | SHAFT LENGTH | 0.938 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 3.000 INCHES NOMINAL |
| ASYH | ATTENUATION PER STEP IN DECIBELS | 10.0 |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.500 INCHES NOMINAL |
| CQYJ | MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| CRSJ | SHAFT TYPE | ROUND |
| ASYF | ATTENUATION VARIATION METHOD | STEPPED |
| CGGK | MOUNTING THREAD QUANTITY | 32 PER INCH |
| CTGG | IMPEDANCE RATING IN OHMS | 1000.0 INPUT-OUTPUT |
| CQTQ | ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ASYG | STEP POSITION QUANTITY | 6 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |