NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
---|---|---|---|---|---|---|---|---|
PL 14811020 ITEM 156 | 95310 | R | 5 | 9 | A | ZZ | ||
820650G55AE | 58474 | A | C | 1 | 9 | TU | ||
FR9370D | F7463 | A | 5 | 2 | 4 | ZF | ||
8100013 | 15434 | A | C | 1 | 6 | ZZ | AA | |
C4524-380-4 | 60532 | A | 5 | 1 | 1 | PA | ||
MS28173-10 | D9182 | A | C | 1 | 6 | ZZ | AC | |
1018985-001 | 0HBH2 | A | 5 | 1 | 5 | ZZ | ||
4B4276 | D9182 | A | C | 1 | 6 | ZZ | AC | |
0708071 | S3002 | A | 5 | 2 | 3 | YB | ||
12Z3035-37 | 94135 | M | 5 | 1 | X | XX | ||
NAS1070-416L | D9182 | A | C | 1 | 6 | ZZ | AC | |
A22506-4 | 89326 | A | 5 | 1 | 5 | KZ | ||
9419274 | 17769 | H | 5 | 9 | 5 | KZ | ||
MS27183-10 | D9182 | A | C | 1 | 6 | ZZ | AC | |
120392 | D9182 | A | C | 1 | 6 | ZZ | AC | |
75ELS24 | 00736 | A | 5 | 1 | 6 | KZ | ||
5310PL0727703 | 9009H | A | 5 | 9 | 9 | WP | ||
120392 | 11862 | H | 5 | 9 | 5 | KZ | ||
6640211 FIND 33 | 53711 | A | C | 1 | 6 | ZZ | AC | |
L4280-17 | 46717 | A | 5 | 9 | X | XX | ||
G9419274 | 34623 | A | 5 | 1 | 5 | KZ | ||
VS1-4 | 05186 | A | 5 | 9 | 5 | KZ | ||
12-Z-22-271 | D9182 | A | C | 1 | 6 | ZZ | AC | |
25-000065-011 | 63123 | A | 5 | 9 | 5 | KZ | ||
1C6360P14 | 07482 | A | C | 1 | 6 | ZZ | AC | |
NAS1070-416 | 98897 | A | 5 | 1 | A | KZ | ||
AU02AA171 | 19422 | F | 5 | 9 | 5 | CT | ||
9419892 | 11862 | H | 5 | 9 | 5 | KZ | ||
AU02AA171 | 10855 | A | 5 | 1 | 5 | CT | ||
C12-22937 | 88907 | A | 5 | 1 | 2 | KZ | ||
88-20564-2 | 30554 | A | 5 | 1 | E | ZZ | ||
81309826 | 82796 | A | C | 1 | 6 | ZZ | AC | |
18L4280-17 | 16662 | A | 5 | 1 | 5 | CX | ||
MS27183-10 | 96906 | M | 2 | 2 | E | XX | ||
1018985D001 | 05037 | A | 5 | 9 | 5 | KZ | ||
13207E8525FN4 | 97403 | A | 5 | 1 | 5 | CT | ||
SK-11001-5 | 0EAK3 | A | 5 | 1 | 5 | KZ | ||
1018985-001 | 05037 | A | 5 | 9 | 5 | ZZ | ||
67872 | 58464 | H | 5 | 9 | 5 | AZ | ||
1018985 | 05037 | A | 5 | 9 | 5 | KE | ||
MS15795-210 | 96906 | M | 5 | 9 | 3 | TU | ||
108202-15 | 21714 | H | 5 | 9 | 4 | SB | ||
LS1785-416 | D9182 | A | C | 1 | 6 | ZZ | AC | |
A609014 | 53964 | A | 5 | 1 | 5 | KZ | ||
5310008094058 | SCY13 | A | 5 | 9 | 9 | YP | ||
016120076 | 5N978 | A | C | 1 | 6 | ZZ | AA | |
703HX1 | 45152 | A | 5 | 1 | 5 | ZZ | ||
9419274 | 24617 | A | 5 | 1 | 5 | KZ | ||
75ELS24 | R1120 | A | 5 | 2 | 6 | ZG | ||
103339 | D9182 | A | C | 1 | 6 | ZZ | AC | |
88-20564 | 30554 | A | D | 9 | A | ZZ | ||
703HX | SCY13 | A | 5 | 9 | 9 | YP | ||
PL14811020 ITEM 156 | 0DHG4 | A | 5 | 1 | 5 | ZZ | ||
WG105347 | 3X894 | A | C | 1 | 5 | ZZ | AC | |
5310-000 | 61796 | A | C | 1 | 6 | ZZ | AA | |
SP25119 | 10001 | A | 5 | 9 | X | XX | ||
37766 | 96046 | A | 5 | 1 | 5 | CT | ||
70026-10 | 95097 | H | 5 | 9 | 5 | SE |
CAGE Information
Code | Company |
---|---|
00736 | FALLS FILTRATION TECHNOLOGIES INC. |
95310 | UNIDYNAMICS/SAINT LOUIS INC CONROE O |
58474 | SUPERIOR ELECTRIC HOLDING GROUP LLC |
F7463 | SOC CONSTRUC MACHINES OUTILS BLISS |
15434 | CUMMINS INC. |
60532 | TRANE U.S. INC. DBA TRANE DIV TRANE |
D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
0HBH2 | LEXEL IMAGING SYSTEMS INC. |
S3002 | MOWAG AG |
94135 | NAVAL ORDNANCE STANDARDS |
89326 | BARKSDALE INC |
17769 | L AND S INDUSTRIES INC |
9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
53711 | NAVAL SEA SYSTEMS COMMAND |
46717 | PETTIBONE LLC |
34623 | AM GENERAL LLC |
05186 | ANDERS & SONS INC. |
63123 | FARRIS M & ASSOCIATES |
07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
19422 | DEMARKUS CORP REFRIGERATION ENGINEER |
10855 | CARRIER CORPORATION DIV CARRIER TRAN |
88907 | BRUNSWICK CORPORATION DBA MERCURY MA |
30554 | DEPARTMENT OF DEFENSE PROJECT MANAGE |
82796 | COLTEC INDUSTRIES INC. DBA FAIRBANKS |
16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN |
96906 | MILITARY STANDARDS PROMULGATED BY MI |
05037 | ANACOMP INC. |
97403 | CECOM LR CENTER |
0EAK3 | GSE MANAGEMENT CO |
58464 | SHELLER-GLOBE CORP SUPERIOR-LIMA DIV |
21714 | KECO INDUSTRIES INC AEROSPACE GROUND |
53964 | KAYDON CUSTOM FILTRATION CORPORATION |
SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
5N978 | THERMA-TECH ENGINEERING INC DBA A. R |
45152 | OSHKOSH CORPORATION |
24617 | GENERAL MOTORS CORP |
R1120 | SATAIR A/S |
0DHG4 | GULF COAST HOLDINGS INC DBA UNIDYNAM |
3X894 | CONTROL FLOW INC. DBA WESTECH HEAVY |
61796 | CEMEN TECH INC. |
10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
96046 | CRANE PUMPS & SYSTEMS INC. |
95097 | LITTLE GIANT CRANE AND SHOVEL INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
ABNM | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
ADAV | OVERALL DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
ABMX | CENTER HOLE SHAPE STYLE | ROUND |
MATT | MATERIAL | STEEL COMP 1013 OVERALL OR STEEL COMP 1008 OVERALL OR STEEL COMP 1010 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1012 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1011 OVERALL OR STEEL COMP 1017 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL |
AAUB | HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 GRADE AND A TYPE AND A CLASS |
ABMW | PERIPHERAL SHAPE STYLE | ROUND |
AGAV | END ITEM IDENTIFICATION | FAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS); 3990-01-444-5196 CEMENT MIXER |
FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A109 ASSN STD ALL MATERIAL RESPONSES OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |