NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 70026-16 | 95097 | H | 5 | 9 | 5 | SE | ||
| C4524-380-7 | 60532 | A | 5 | 1 | 1 | PA | ||
| 3631V008 | 27315 | A | E | 8 | 5 | KZ | ||
| 6300782-16 | 53711 | A | 5 | 1 | 5 | ZZ | ||
| MS27183-16 | 96906 | M | 2 | 2 | 4 | PA | ||
| FF-W-92 | 81348 | M | 4 | 1 | 4 | KZ | ||
| 15129 | 04627 | A | E | 8 | 5 | ZZ | ||
| 120395 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| 120395 | 11862 | H | 5 | 9 | 5 | KZ | ||
| 526-1518 | 44940 | A | 5 | 1 | 6 | CT | ||
| 15129 | 30076 | A | E | 8 | 5 | KZ | ||
| 9420022 | 24617 | A | 5 | 1 | 1 | KZ | ||
| 303860 | H0G87 | A | 5 | 2 | 4 | ZN | ||
| 2436164 | 11862 | H | 5 | 9 | A | KZ | ||
| 14021293 | 11862 | H | C | 1 | 9 | AZ | AA | |
| 120395 | 24617 | A | C | 1 | 9 | AZ | AA | |
| 0724989 | S3002 | A | 5 | 2 | 4 | ZS | ||
| 5310008094085 | SCY13 | A | 5 | 9 | 9 | YP | ||
| 103342 | D9182 | A | C | 1 | 6 | ZZ | AC |
CAGE Information
| Code | Company |
|---|---|
| 04627 | NACCO MATERIALS HANDLING GROUP INC |
| 95097 | LITTLE GIANT CRANE AND SHOVEL INC |
| 60532 | TRANE U.S. INC. DBA TRANE DIV TRANE |
| 27315 | MORRIS MATERIAL HANDLING INC. |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
| 44940 | CUMMINS POWER GENERATION INC. DBA CU |
| 30076 | NACCO MATERIALS HANDLING GROUP INC D |
| 24617 | GENERAL MOTORS CORP |
| H0G87 | WIBA ZEVENAAR B.V. |
| S3002 | MOWAG AG |
| SCY13 | E.C.A ETABLISSEMENT CENTRAL DES APPR |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABNM | THICKNESS | 0.051 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 GRADE AND A CLASS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ADAV | OVERALL DIAMETER | 0.915 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| AAUB | HOLE DIAMETER | 0.464 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |