NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 7709847P10 | 24446 | A | 5 | 2 | X | XX | ||
| 7709847P10 | 03538 | A | 3 | 2 | 5 | TX | ||
| 747-6025 | 19176 | A | 5 | 2 | 5 | TX | ||
| 747-6025 | 12205 | H | 5 | 9 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 03538 | LOCKHEED MARTIN CORPORATION DBA MS2 |
| 24446 | GENERAL ELECTRIC CO |
| 19176 | SERVO INSTRUMENT CORPORATION |
| 12205 | BUNKER RAMO CORP AMPHENOL CONTROLS D |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| ADAQ | BODY LENGTH | 0.995 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AAVM | PILOT LENGTH | 0.3100 INCHES MINIMUM AND 0.9300 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ABPC | UNDERCUT WIDTH | 0.0760 INCHES MINIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 352.0 NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| ADAV | OVERALL DIAMETER | 2.250 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEDA | MOUNTING LIP DEPTH | 0.0620 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 3.5 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 SINGLE SECTION |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 0.0 |
| AECZ | MOUNTING LIP DIAMETER | 1.9690 INCHES MINIMUM AND 2.0310 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.657 INCHES NOMINAL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABHP | OVERALL LENGTH | 1.807 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ABPM | BODY DIAMETER | 1.969 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.874 INCHES MINIMUM AND 1.875 INCHES MAXIMUM |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |