NIIN Output Data
NIIN:
NSN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2157515G1 | 28527 | A | 5 | 2 | 1 | AX | ||
| GAB64A152P1-8 | 04391 | A | 3 | 2 | 4 | AX |
CAGE Information
| Code | Company |
|---|---|
| 04391 | FLUID MECHANISMS OF HAUPPAUGE INC. |
| 28527 | ITT CORPORATION |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.071 INCHES SECOND END |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| CWRS | BORE NOMINAL DIAMETER | 0.241 INCHES BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 0.125 INCHES |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| AGJS | PITCH DIAMETER | 2.3745 INCHES NOMINAL |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN SECOND END |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWTR | HUB STYLE DESIGNATOR | SPLIT FIRST END |
| STYL | STYLE DESIGNATOR | PROTRUDING HUBS |
| CWTX | HUB NOMINAL DIAMETER | 0.375 INCHES SECOND END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AJLA | TEETH QUANTITY | 152 |
| CWTX | HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| ANTP | BORE STYLE | PLAIN BOTH ENDS |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.264 INCHES FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 2.405 INCHES |
| CWNH | TOOTH FORM | STANDARD |